Skip to content 10% off with code BLOG10The right massage device

Cart

Your cart is empty

Where would you like to start?

Popular right now

Article: Repairing a massage chair: recognising and classifying faults

Repairing a massage chair: recognising and classifying faults

In short

A massage chair is a piece of furniture fitted with motors, an air pump, a control board and a mains connection. Consequently, there are more potential faults than with a sofa – but also more instances where the cause is trivial and can be sorted out in five minutes. This article will help you distinguish between the two: what you can check yourself and when DIY is no longer an option.

Show table of contents
Click here to read the full article for free
DisplayRelated offers for the article ‘Repairing a massage chair: recognising and classifying faults’
Display

Summary/TLDR

Before you assume there’s a fault, check the three most common trivial causes: is the chair actually plugged in and the main switch turned on, is it far enough from the wall for the reclining function to work, and is a transport lock or child safety lock still active? After that, the fault can usually be traced to a specific component: the rollers aren’t moving (drive or control unit), individual air cushions aren’t inflating (hose or valve), the remote control isn’t responding (cable or contact), the chair isn’t moving back (use the emergency lowering function). Do not open the casing – the chair is live, and doing so will usually void the warranty. Noises such as squeaking are a separate issue and can usually be resolved by the user.

Firstly: the three common causes

A significant proportion of service calls can be resolved by checking these three points:

Relax Lounge Hamburg Try our massage chairs in Hamburg. Book online.
  1. Power supply. Ensure the mains plug is securely connected, the socket is live (check with another appliance), and the toggle switch on the chair is set to ‘on’. Many models also have a switch on the power supply unit that is often overlooked.
  2. Distance from the wall. Armchairs without a wall-clearance mechanism need space to move back. If the backrest is touching the wall, the automatic mechanism is blocked – to the user, this looks like a faulty motor.
  3. Transport lock or safety catch. On new appliances, screws or clips are sometimes still fitted. Some models have a button lock that can be activated without you realising.

Only once these three points have been properly checked is it worth troubleshooting by component.

Fault patterns and what lies behind them

Symptom Likely cause Can you fix it yourself?
No response at all Power supply, fuse in the power supply unit Yes, check the power supply circuit
Rollers are not moving Drive motor or control unit No, contact service
Rollers jerk or get stuck Dirty rail or foreign objects Partially; clean the visible area
Individual air cushions remain deflated Hose has slipped off or valve is faulty No, service required
Not a single air cushion is working Air pump or its control unit No, service
Remote control not working Connector on the chair has come loose Yes, check the plug
Display is on, but the chair is not responding Lock active or control Partially; check lock
Heating function remains cold Heating element or control unit No, service required
Chair does not move back Distance from wall, obstruction, adjustment motor Yes, check space and for obstacles
Squeaking, creaking Rotary ring, screws, gas spring Yes, usually a DIY job

The rule is simple: anything to do with mains voltage, motors or pneumatics should be left to a service technician. Anything to do with installation, dirt, plug connections or mechanics you can sort out yourself.

The free article continues below ↓
Display

Noises are usually not a fault

Squeaking and creaking sounds can be alarming, but they rarely require a service call. In the vast majority of cases, the cause is a dry swivel ring, a loose screw connection or a groaning gas spring – all of which can be fixed using the tools you have to hand.

The only important thing is to choose the right lubricant; using the wrong one will make the problem worse after a short time. Full instructions, including how to pinpoint the source of the noise, can be found in Recliner squeaks: find the cause and fix it yourself. Specifically for massage chairs: Massage chair squeaks – here’s what to do.

What you can safely do yourself

  • Check the power supply. Test the socket and inspect the cable for kinks and chafing.
  • Check the plug connections. On many models, the remote control is connected via a jack plug or flat plug on the side of the chair; this can easily slip out when the chair is moved.
  • Clean visible rail areas. Crumbs, coins and pens can get into the gap and block the rollers. Make sure the chair is switched off before doing this.
  • Tighten the screws on the armrests and footrest. This is the most common cause of wobbling and creaking.
  • Remove the covers and cushions and check whether anything is trapped underneath.
  • Disconnect the unit completely from the mains , wait a minute and restart it. This often helps with control system freezes.

All of this can be done without any specialist tools and poses no risk to your health or the warranty.

Where DIY ends

The cover of a massage chair won’t close. There are three reasons for this, and any one of them is sufficient:

  • Mains voltage. The chair carries 230 volts. This is not a situation for trial and error.
  • Warranty. Opening the casing generally voids the warranty – even if the fault had nothing to do with the intervention.
  • Mechanical tension. The adjustment mechanisms and gas springs are under tension. A loosened component may move suddenly.

If a motor, a pump, a heating element or the control system is affected, calling the service team is not an expensive stopgap measure, but the right course of action.

Preparing for the service call

A well-prepared call saves you from having to make a second appointment. Have the following to hand:

  • Model name and serial number – usually on a sticker on the back or under the seat
  • Date of purchase and receipt
  • Any error code shown on the display – note it down verbatim
  • When the fault occurs: immediately, after a few minutes, or only in certain programmes
  • What you’ve already checked
  • A short video or audio recording if the issue involves a noise or a sporadic fault

The penultimate point is the most valuable: a fault that only occurs in a specific programme often narrows the cause down to a single component.

What makes faults less common

Most premature failures have trivial causes:

  • Do not exceed the permissible load. This specification is stated in the instructions and is not merely a recommendation.
  • Do not remain seated in the chair if it becomes jammed. First relieve the load, then check.
  • Keep drinks out of reach of the mechanism. Liquid in the control system causes the most expensive damage.
  • Vacuum regularly , especially the gap between the seat and the backrest.
  • After a long period of non-use , run it through a short cycle rather than leaving it unused for months on end.

The full care routine is set out in the maintenance guide. This article summarises the other drawbacks a massage chair can present in everyday life.

Repair or replace?

A rough guide: for a chair less than five years old, repair is almost always worthwhile, as motors and pumps are available as individual parts. It becomes a problem if the manufacturer no longer exists or supplies from abroad and spare parts take weeks to arrive – a point it is better to clarify before buying rather than afterwards.

For older models, it depends on which component is faulty: a control board is often the most expensive individual part. If the cost of replacing it amounts to half the price of a comparable new chair, replacing the chair is the more sensible option. For guidance on prices and categories, see How much does a good massage chair cost?, and the latest models are listed in the overview of massage chairs and massage armchairs.

Conclusion

The most common ‘fault’ isn’t a fault at all: insufficient clearance from the wall, a loose remote control connector or an active lock. Checking these points will, in many cases, save you from having to make a service call. If it turns out that the motors, pump, heating element or control system are affected, the chair’s casing is still part of the issue – due to the mains voltage and the warranty. A well-prepared service call, including the model number, error code and a description of the problem, is then the quickest way to get your chair working again.

Frequently Asked Questions (FAQs)

My massage chair has stopped responding completely – what should I do?

First, check the power supply: test the socket with another appliance, check the mains plug and the switch on the power supply unit, then check the main switch on the chair. If the problem persists, disconnect the chair completely from the mains for one minute and restart it. If that doesn’t help, it’s a case for the service team.

The rollers in the back are no longer moving.

This suggests a problem with the drive or the control system and is not something you can repair yourself. Before anything else, it’s worth checking whether a foreign object is stuck in the rail area – to do this, switch off the chair and inspect the visible gap.

Individual air cushions are no longer inflating.

Usually, a hose has come loose or a valve is faulty. Both are located behind the trim and should be dealt with by a service technician. If none of the air cushions are working at all, the problem is more likely to be with the pump or its control system.

The remote control is not responding.

The most common reason is a loose plug on the side of the chair. Check the connection and plug it in firmly. If the display does not respond at all, it is a power issue; if it lights up but the chair does not move, check for an active button lock.

Can I open the massage chair myself?

It’s best not to. The chair is live, the adjustment mechanism and gas springs are under tension, and opening the casing will usually void the warranty – even if the fault had nothing to do with your intervention.

The chair won’t return to the sitting position.

It is usually too close to the wall or something is blocking it. Move the chair away, create some space, and try again. Many models have an emergency lowering function; the manual will tell you where to find it. If the problem persists, the adjustment motor is faulty.

How much does a repair cost?

That depends entirely on the component in question. Plug connections and mechanical parts are inexpensive; a control board is often the most expensive single part. As a rule of thumb: if the costs amount to half the price of a comparable new chair, it’s usually better to replace it.

How long does a massage chair last?

This depends less on its age than on how it’s used. Regular vacuuming, adhering to the maximum weight limit and keeping drinks out of reach of the mechanical parts will extend its lifespan far more than any additional maintenance.

Display

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

All comments are moderated before being published.

Ad · Our picks on Amazon“Repairing a massage chair”

Read more

Massage Chairs - Guide & Useful Information

Massage chairs and Parkinson's: what to bear in mind

With Parkinson's, massage can have a favourable effect on muscle tension and wellbeing. What a chair can do, which settings suit and where the limits lie.

Read more
Massage Chairs - Guide & Useful Information

Massage chair health risks and when to avoid one

For healthy adults, a massage chair is low-risk. Which conditions call for a doctor's advice first, what overly long sessions do, and which warning signs matter.

Read more